[Trilinos-Users] [EXTERNAL] problem building Intrepid2 library

[Templeton, Jeremy Alan]

Hi Kara, it is in the package list file:

  Intrepid              packages/intrepid                 PS
  Intrepid2             packages/intrepid2                SS


I also tried the compilers suggested by Peter and consistently cmake informs me it is not enabling Intrepid 2.  Peter, if you have a configuration script, I’d be happy to try that to see if it helps.
Jeremy

On Dec 5, 2016, at 2:44 PM, Peterson, Kara J. <kjpeter at sandia.gov<mailto:kjpeter at sandia.gov>> wrote:

Hi Jeremy,

I’m wondering now whether there is a problem with your Trilinos repository.

Looking at your cmake.out, it appears that cmake is not recognizing Intrepid2. Near the end of the file under "Manually-specified variables not used by the project” both Trilinos_ENABLE_Intrepid2 and Intrepid2_ENABLE_TESTS are listed.

Another strange thing is that the number of packages and number of SE packages are different from what I get when building Trilinos 12.10.1. In your cmake.out file it’s

-- Trilinos_NUM_PACKAGES=’57'

-- Trilinos_NUM_SE_PACKAGES=‘144'

But I see

-- Trilinos_NUM_PACKAGES=’56'

-- Trilinos_NUM_SE_PACKAGES=‘147’

Could you check and make sure that Intrepid2 is listed in /fscratch/jatempl/trilinos-12.10.1-Source/PackagesList.cmake?

Thanks,
Kara

From: "Templeton, Jeremy Alan" <jatempl at sandia.gov<mailto:jatempl at sandia.gov>>
Date: Monday, December 5, 2016 at 1:20 PM
To: "Bosler, Peter Andrew" <pabosle at sandia.gov<mailto:pabosle at sandia.gov>>
Cc: "Peterson, Kara J." <kjpeter at sandia.gov<mailto:kjpeter at sandia.gov>>, "trilinos-users at trilinos.org<mailto:trilinos-users at trilinos.org>" <trilinos-users at trilinos.org<mailto:trilinos-users at trilinos.org>>
Subject: Re: [Trilinos-Users] [EXTERNAL] problem building Intrepid2 library

Hi all, my typical workflow is to blow away everything in the build directory prior to running cmake.  Just to be safe, I did that again and have attached the output and the CMakeCache.txt file.  I can see at the end of the output that cmake is aware that it is not configuring intrepid2, so I’m not going to both trying a rebuild.  I can’t see anything in the cmake file telling me why, but I’m also not a cmake expert.  I’ll try swapping out the models as suggested by Peter below next.
Jeremy


--------------------------------------------------------
Jeremy A. Templeton, Ph.D.
Thermal/Fluid Sciences & Engineering
jatempl at sandia.gov<mailto:jatempl at sandia.gov>
925-294-1429





-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://trilinos.org/pipermail/trilinos-users/attachments/20161205/842d7ae2/attachment.html>