[Trilinos-Users] Trying to install basic Trilinos
Bartlett, Roscoe A
rabartl at sandia.gov
Fri Feb 25 12:40:59 MST 2011
Peter,
For a quick install of a non-optimized LAPACK/BLAS try:
http://www.netlib.org/clapack/
(e.g. clapack-3.2.1-CMAKE.tgz)
- Ross
> -----Original Message-----
> From: trilinos-users-bounces at software.sandia.gov [mailto:trilinos-
> users-bounces at software.sandia.gov] On Behalf Of Raeth, Peter
> Sent: Friday, February 25, 2011 12:31 PM
> To: trilinos-users at software.sandia.gov
> Subject: Re: [Trilinos-Users] Trying to install basic Trilinos
>
> Many thanks to all who have responded.
>
> Having deleted the old cmake stuff I now have to locate the blas
> libraries on this particular machine.
>
> Will keep at it and report back.
>
>
> Best,
>
> Peter.
>
> Peter G. Raeth, Ph.D.
> Senior Staff Scientist
> Signal and Image Processing
> High Performance Technologies, Inc
> 937-904-5147
> praeth at hpti.com
>
> ________________________________________
> From: chris at paratools.com [chris at paratools.com]
> Sent: Friday, February 25, 2011 2:28 PM
> To: Bartlett, Roscoe A
> Cc: Heroux, Mike; Cole,David; Raeth, Peter; trilinos-
> users at software.sandia.gov
> Subject: Re: [Trilinos-Users] Trying to install basic Trilinos
>
> Hi Peter,
> Here is a copy of my build_script for trilinos
> I call it from a master build script that loads the module environment
> and I set the the BUILD_DIR and INSTALL_DIR
> it also point to the location for the package sources PKG_DIR
>
> You need to install the lastest version of cmake
> I built this using different gnu compilers version and different
> mpi versions(openmpi) it is fairly robust and generates a couple of
> log files as it runs.
>
> #!/bin/csh
> ############################################################
> ## configure and install of Trilinos-10.6.2
> ## by Chris Bording 17 Sep 2010
> ## modified 23 Dec 2010
> ############################################################
> # application variables
> set APP_NAME=trilinos
> set APP_VERSION=10.6.2
>
> #set EXTRA_ARGS=$@
>
> set ACTS_BUILD=${BUILD_DIR}
> set ACTS_INSTALL=${INSTALL_DIR}
>
> set TRILINOS_PATH=${ACTS_INSTALL}/${APP_NAME}-${APP_VERSION}
> set TRILINOS_HOME=${ACTS_BUILD}/${APP_NAME}-${APP_VERSION}-Source
>
> # copy souce packages to build directory.
>
> cd ${ACTS_BUILD}
>
> cp ${PKG_DIR}/${APP_NAME}-${APP_VERSION}-Source.tar.gz .
>
> # rm any previous build tar file of same version
> rm -rf ${APP_NAME}-${APP_VERSION}-Source
> rm -f ${APP_NAME}-${APP_VERSION}-Source.tar
>
> you'll want to change the paths for the blas,lapack and mpilib for
> your system.
> but it just might work for you.
>
> # unzip and extract tar file
> gunzip ${APP_NAME}-${APP_VERSION}-Source.tar.gz
> tar -xf ${APP_NAME}-${APP_VERSION}-Source.tar
>
> cd ${TRILINOS_HOME}
>
> mkdir build
> ls -al
> cd build
>
> echo begin cmake in `pwd`
> #set EXTRA_ARGS=$@
>
> cmake \
> -D CMAKE_INSTALL_PREFIX:PATH=$TRILINOS_PATH \
> -D CMAKE_BUILD_TYPE:STRING=RELEASE \
> -D CMAKE_CXX_FLAGS:STRING="-m64" \
> -D CMAKE_C_FLAGS:STRING="-m64" \
> -D Trilinos_ENABLE_Mesquite:BOOL=ON \
> -D Trilinos_ENABLE_ML:BOOL=ON \
> -D Trilinos_ENABLE_Epetra:BOOL=ON \
> -D Trilinos_ENABLE_EpetraExt:BOOL=ON \
> -D Trilinos_ENABLE_Tpetra:BOOL=ON \
> -D Trilinos_ENABLE_Jpetra:BOOL=ON \
> -D Trilinos_ENABLE_Kokkos:BOOL=ON \
> -D Trilinos_ENABLE_AztecOO:BOOL=ON \
> -D Trilinos_ENABLE_Zoltan:BOOL=ON \
> -D Trilinos_ENABLE_FEI:BOOL=ON \
> -D Trilinos_ENABLE_Sacado:BOOL=ON \
> -D Trilinos_ENABLE_Anasazi:BOOL=ON \
> -D Trilinos_ENABLE_Meros:BOOL=ON \
> -D Trilinos_ENABLE_Belos:BOOL=ON \
> -D Trilinos_ENABLE_Komplex:BOOL=ON \
> -D Trilinos_ENABLE_TESTS:BOOL=ON \
> -D BLAS_LIBRARY_DIRS:PATH=/usr/lib64 \
> -D BLAS_LIBRARY_NAMES:STRING="blas" \
> -D LAPACK_LIBRARY_DIRS:PATH=/usr/lib64 \
> -D LAPACK_LIBRARY_NAMES:STRING="lapack" \
> -D TPL_ENABLE_MPI:BOOL=ON \
> -D MPI_BASE_DIR:PATH="${MPIHOME}" \
> -D MPI_EXEC:FILEPATH="mpirun" \
> -D MPI_EXEC_MAX_NUMPROCS:STRING=4 \
> -D MPI_EXEC_NUMPROCS_FLAG:STRING=-np \
> -D DART_TESTING_TIMEOUT:STRING=600 \
> ${TRILINOS_HOME}
>
>
> #${TRILINOS_HOME}
> #-D CMAKE_INSTALL_PREFIX:PATH=$TRILINOS_PATH \
>
> make >& make_${APP_NAME}-${APP_VERSION}.log
>
> make test >& make_${APP_NAME}-${APP_VERSION}_test.log
>
> make install >& make_${APP_NAME}-${APP_VERSION}_install.log
>
> cd ${TRILINOS_PATH}
>
> ####################################################################3
>
>
> Quoting "Bartlett, Roscoe A" <rabartl at sandia.gov>:
>
> > The part about deleting the CMakeCache.txt file under the source
> > directory is not obvious and I think this might have bitten me a few
> > years ago too when I first started using CMake (if I can remember
> > that far back).
> >
> > - Ross
> >
> >
> >> -----Original Message-----
> >> From: trilinos-users-bounces at software.sandia.gov [mailto:trilinos-
> >> users-bounces at software.sandia.gov] On Behalf Of Heroux, Mike
> >> Sent: Friday, February 25, 2011 11:28 AM
> >> To: Bartlett, Roscoe A; Cole,David; Raeth, Peter
> >> Cc: trilinos-users at software.sandia.gov
> >> Subject: Re: [Trilinos-Users] Trying to install basic Trilinos
> >>
> >> Thanks Ross. I should have remembered this. It is always the first
> >> thing to try when puzzled by cmake...
> >>
> >> Mike
> >>
> >>
> >> On 2/25/11 11:46 AM, "Roscoe Bartlett" <rabartl at sandia.gov> wrote:
> >>
> >> All,
> >>
> >> I just made a commit to Trilinos so that when someone tries to do an
> >> in-source configuration of Trilinos they will get:
> >>
> >> --------------------------------------------------------------------
> ---
> >> --------------------
> >>
> >> [rabartl at brain Trilinos]$ cmake .
> >>
> >> Configuring Trilinos build directory
> >>
> >> CMake Error at CMakeLists.txt:15 (MESSAGE):
> >> ERROR!
> >>
> >>
> CMAKE_CURRENT_SOURCE_DIR=/home/rabartl/PROJECTS/Trilinos.base/Trilinos
> >> ==
> >>
> >>
> CMAKE_CURRENT_BINARY_DIR=/home/rabartl/PROJECTS/Trilinos.base/Trilinos
> >>
> >> Trilinos does not support in source builds!
> >>
> >> NOTE: You must now delete the CMakeCache.txt file and the
> CMakeFiles/
> >> directory under the source directory for Trilinos or you will not
> be
> >> able
> >> to configure Trilinos correctly!
> >>
> >> You must now run something like:
> >>
> >> $ rm -r CMakeCache.txt CMakeFiles/
> >>
> >> Please create a different directory and configure Trilinos under
> that
> >> such
> >> as:
> >>
> >> $ mkdir MY_BUILD
> >> $ cd MY_BUILD
> >> $ cmake [OPTIONS] ..
> >>
> >> --------------------------------------------------------------------
> ---
> >> --------------------
> >>
> >> This will active in the next release of Trilinos.
> >>
> >> Hopefully this will avoid future problems and email traffic on this
> >> topic in the future.
> >>
> >> - Ross
> >>
> >>
> >>
> >>
> >>
> >>
> >> From: trilinos-users-bounces at software.sandia.gov [mailto:trilinos-
> >> users-bounces at software.sandia.gov] On Behalf Of David Cole
> >> Sent: Friday, February 25, 2011 9:31 AM
> >> To: Raeth, Peter
> >> Cc: trilinos-users at software.sandia.gov
> >> Subject: Re: [Trilinos-Users] Trying to install basic Trilinos
> >>
> >> Delete the CMakeCache.txt that is probably in your source directory
> and
> >> try again.
> >>
> >>
> >>
> >> Once an in-source build has been attempted, you have to remove the
> >> stuff CMake writes into the source tree to get rid of the cache.
> >>
> >> Try starting over with a clean source tree. That should do it.
> >> Everything else looks correct.
> >>
> >>
> >>
> >>
> >>
> >> On Fri, Feb 25, 2011 at 11:03 AM, Raeth, Peter <PRaeth at hpti.com>
> wrote:
> >> Hi Brent.
> >>
> >> Copied do_configure to the build directory and modified it to try
> what
> >> you said. The new script is:
> >>
> >> hawk-0:/app2/comenv/ALTIX4700/.unsupported/trilinos-10.6.2-
> >> Source/build/ cat ./do_configure.sh
> >>
> >> #!/bin/csh -x
> >>
> >> setenv TRILINOS_HOME ../
> >>
> >> setenv PATH /app2/comenv/ALTIX4700/pkgs/cmake-2.8.1/bin:$PATH
> >> pwd
> >>
> >>
> >> cmake \
> >> -D CMAKE_BUILD_TYPE:STRING=DEBUG \
> >> -D
> >>
> CMAKE_INSTALL_PREFIX:PATH=/app2/comenv/ALTIX4700/.unsupported/trilinos-
> >> build \
> >> -D Trilinos_ENABLE_ALL_OPTIONAL_PACKAGES:BOOL=ON \
> >> -D Trilinos_ENABLE_ALL_FORWARD_DEP_PACKAGES:BOOL=ON \
> >> -D Trilinos_ENABLE_TESTS:BOOL=ON \
> >> -D Trilinos_ENABLE_Epetra:BOOL=ON \
> >> -D Trilinos_ENABLE_Triutils:BOOL=ON \
> >> -D Trilinos_ENABLE_Anasazi:BOOL=ON \
> >> -D Trilinos_ENABLE_Didasko:BOOL=ON \
> >> $TRILINOS_HOME
> >>
> >> exit
> >> hawk-0:/app2/comenv/ALTIX4700/.unsupported/trilinos-10.6.2-
> >> Source/build/
> >>
> >>
> >>
> >> Received the same error message:
> >>
> >> hawk-0:/app2/comenv/ALTIX4700/.unsupported/trilinos-10.6.2-
> >> Source/build/ ./do_configure.sh
> >>
> >> setenv TRILINOS_HOME ../
> >> setenv PATH /app2/comenv/ALTIX4700/pkgs/cmake-
> >> 2.8.1/bin:/app2/comenv/ALTIX4700/pkgs/cmake-
> >>
> 2.8.1/bin:/usr/local/krb5/bin:/usr/local/ossh/bin:/opt/pbs/default/bin:
> >>
> /opt/intel/idb/9.1.042/bin:/opt/intel/cc/9.1.042/bin:/opt/intel/fc/9.1.
> >>
> 036/bin:/hafs2/praeth/bin:/hafs2/praeth/bin/linux.altix:/usr/ucb:/bin:/
> >>
> usr/bin:/hafs_linux.altix:/app/csiapps/base/linux.altix/bin:/app/bciapp
> >>
> s/base/linux.altix/bin:/usr/local:/usr/bin/X11:/usr/local/bin:/opt/gnom
> >> e/bin:.
> >> pwd
> >> /aloe/app/comenv/ALTIX4700/.unsupported/trilinos-10.6.2-Source/build
> >> cmake -D CMAKE_BUILD_TYPE:STRING=DEBUG -D
> >>
> CMAKE_INSTALL_PREFIX:PATH=/app2/comenv/ALTIX4700/.unsupported/trilinos-
> >> build -D Trilinos_ENABLE_ALL_OPTIONAL_PACKAGES:BOOL=ON -D
> >> Trilinos_ENABLE_ALL_FORWARD_DEP_PACKAGES:BOOL=ON -D
> >> Trilinos_ENABLE_TESTS:BOOL=ON -D Trilinos_ENABLE_Epetra:BOOL=ON -D
> >> Trilinos_ENABLE_Triutils:BOOL=ON -D Trilinos_ENABLE_Anasazi:BOOL=ON
> -D
> >> Trilinos_ENABLE_Didasko:BOOL=ON ../
> >>
> >>
> >> Configuring Trilinos build directory
> >>
> >> CMake Error at CMakeLists.txt:15 (MESSAGE):
> >> Error,
> >>
> CMAKE_CURRENT_SOURCE_DIR=/app2/comenv/ALTIX4700/.unsupported/trilinos-
> >> 10.6.2-Source
> >> ==
> >>
> CMAKE_CURRENT_BINARY_DIR=/app2/comenv/ALTIX4700/.unsupported/trilinos-
> >> 10.6.2-Source
> >>
> >> Trilinos does not support in source builds!
> >>
> >>
> >> -- Configuring incomplete, errors occurred!
> >> exit
> >> hawk-0:/app2/comenv/ALTIX4700/.unsupported/trilinos-10.6.2-
> >> Source/build/
> >>
> >>
> >>
> >> Thanks for the input though.
> >>
> >>
> >>
> >> Best,
> >>
> >> Peter.
> >>
> >> Peter G. Raeth, Ph.D.
> >> Senior Staff Scientist
> >> Signal and Image Processing
> >> High Performance Technologies, Inc
> >> 937-904-5147
> >> praeth at hpti.com
> >>
> >> ________________________________________
> >> From: trilinos-users-bounces at software.sandia.gov [trilinos-users-
> >> bounces at software.sandia.gov] on behalf of Perschbacher, Brent M
> >> [bmpersc at sandia.gov]
> >> Sent: Friday, February 25, 2011 10:52 AM
> >>
> >> To: Raeth, Peter; trilinos-users at software.sandia.gov
> >> Subject: Re: [Trilinos-Users] Trying to install basic Trilinos
> >>
> >> Peter,
> >> I believe what you are trying to do should work. Both configure
> >> scripts
> >> seem fine to me. I use a build tree that is a sub-directory of my
> >> source
> >> tree for pretty much everything I do with Trilinos and it works
> fine. I
> >> do
> >> however, have the configure script in my build directory and then
> use
> >> "../"
> >> as my path to the Trilinos source, but what you have should work
> too.
> >> The
> >> only thing that I can think of to check is if the cd to your build
> >> directory
> >> is failing silently, which might happen if the directory doesn't
> exist.
> >> It
> >> has been a long time since I've used c shell that I don't recall its
> >> behavior for that. Can you put "pwd" right before your cmake call to
> >> see
> >> which directory you are in right before you call cmake.
> >>
> >> Brent
> >>
> >>
> >> On 2/25/11 7:32 AM, "Raeth, Peter" <PRaeth at hpti.com> wrote:
> >>
> >> > If I do "which cmake" at the command line then I get "cmake:
> Command
> >> not
> >> > found." If I then extend the path, "setenv PATH
> >> > /app2/comenv/ALTIX4700/pkgs/cmake-2.8.1/bin:$PATH", I get
> >> > "/app2/comenv/ALTIX4700/pkgs/cmake-2.8.1/bin/cmake". Did this from
> >> > trilinos-build. I also ran do_configure from trilinos-build.
> >> >
> >> > Lets see what others say as the world wakes up.
> >> >
> >> >
> >> > Best,
> >> >
> >> > Peter.
> >> >
> >> > Peter G. Raeth, Ph.D.
> >> > Senior Staff Scientist
> >> > Signal and Image Processing
> >> > High Performance Technologies, Inc
> >> > 937-904-5147
> >> > praeth at hpti.com
> >> >
> >> > ________________________________________
> >> > From: trilinos-users-bounces at software.sandia.gov
> >> > [trilinos-users-bounces at software.sandia.gov] on behalf of Heroux,
> >> Mike
> >> > [MHeroux at csbsju.edu]
> >> > Sent: Friday, February 25, 2011 9:26 AM
> >> > To: Raeth, Peter; trilinos-users at software.sandia.gov
> >> > Subject: Re: [Trilinos-Users] Trying to install basic Trilinos
> >> >
> >> > Actually, what I said was not on point. Sorry. The installation
> >> path has
> >> > nothing to do with this issue (although is a generally good idea).
> >> Need more
> >> > coffee ...
> >> >
> >> > It appears that somehow cmake is being executed from the source
> >> directory,
> >> > even though you appear to be in a different directory. Can you
> >> manually step
> >> > through the script to make sure cmake is being executed in the
> >> trilinos-build
> >> > directory?
> >> >
> >> > If this doesn't help, there are others who are more capable than I
> am
> >> who will
> >> > be online soon.
> >> >
> >> > Sorry to confuse things.
> >> >
> >> > Mike
> >> >
> >> >
> >> > On 2/25/11 8:16 AM, "Raeth, Peter" <PRaeth at hpti.com> wrote:
> >> >
> >> > Thank you for writing Mike.
> >> >
> >> > What led me to use the original script was this comment in the
> >> install
> >> > instructions:
> >> >
> >> > C) Configuring (Makefile Generator)
> >> > -----------------------------------
> >> >
> >> >
> >> > (*) Setting up a build directory:
> >> >
> >> > $ mkdir SOME_BUILD_DIR
> >> > $ cd SOME_BUILD_DIR
> >> >
> >> > NOTE: You can create a build directory from any location you
> would
> >> like. It
> >> > can be a sub-directory of the Trilinos base source directory or
> >> anywhere
> >> > else.
> >> >
> >> >
> >> >
> >> >
> >> > Based on what you said, I created a build directory outside the
> >> source
> >> > directory. The new script is:
> >> >
> >> > #!/bin/csh -x
> >> >
> >> > setenv TRILINOS_HOME
> >> > /app2/comenv/ALTIX4700/.unsupported/trilinos-10.6.2-Source
> >> > setenv PATH /app2/comenv/ALTIX4700/pkgs/cmake-2.8.1/bin:$PATH
> >> > cd /app2/comenv/ALTIX4700/.unsupported/trilinos-build
> >> >
> >> > cmake \
> >> > -D CMAKE_BUILD_TYPE:STRING=DEBUG \
> >> > -D
> >> >
> >>
> CMAKE_INSTALL_PREFIX:PATH=/app2/comenv/ALTIX4700/.unsupported/trilinos-
> >> build \
> >> > -D Trilinos_ENABLE_ALL_OPTIONAL_PACKAGES:BOOL=ON \
> >> > -D Trilinos_ENABLE_ALL_FORWARD_DEP_PACKAGES:BOOL=ON \
> >> > -D Trilinos_ENABLE_TESTS:BOOL=ON \
> >> > -D Trilinos_ENABLE_Epetra:BOOL=ON \
> >> > -D Trilinos_ENABLE_Triutils:BOOL=ON \
> >> > -D Trilinos_ENABLE_Anasazi:BOOL=ON \
> >> > -D Trilinos_ENABLE_Didasko:BOOL=ON \
> >> > $TRILINOS_HOME
> >> >
> >> > exit
> >> >
> >> > Am getting the same error:
> >> >
> >> > Configuring Trilinos build directory
> >> >
> >> > CMake Error at CMakeLists.txt:15 (MESSAGE):
> >> > Error,
> >> >
> >> >
> >>
> CMAKE_CURRENT_SOURCE_DIR=/app2/comenv/ALTIX4700/.unsupported/trilinos-
> >> 10.6.2-S
> >> > ource
> >> > ==
> >> >
> >> >
> >>
> CMAKE_CURRENT_BINARY_DIR=/app2/comenv/ALTIX4700/.unsupported/trilinos-
> >> 10.6.2-S
> >> > ource
> >> > Trilinos does not support in source builds!
> >> >
> >> >
> >> > -- Configuring incomplete, errors occurred!
> >> >
> >> >
> >> > It looks like the process is still trying to put the binary in the
> >> source
> >> > directory and it does not like that. Not being a cmake user, how
> do I
> >> manually
> >> > specify the location of the binary directory?
> >> >
> >> >
> >> >
> >> > Thanks,
> >> >
> >> > Peter.
> >> >
> >> > Peter G. Raeth, Ph.D.
> >> > Senior Staff Scientist
> >> > Signal and Image Processing
> >> > High Performance Technologies, Inc
> >> > 937-904-5147
> >> > praeth at hpti.com
> >> > ________________________________
> >> > From: trilinos-users-bounces at software.sandia.gov
> >> > [trilinos-users-bounces at software.sandia.gov] on behalf of Heroux,
> >> Michael A
> >> > [maherou at sandia.gov]
> >> > Sent: Friday, February 25, 2011 8:45 AM
> >> > To: Raeth, Peter; trilinos-users at software.sandia.gov
> >> > Subject: Re: [Trilinos-Users] Trying to install basic Trilinos
> >> >
> >> > Peter,
> >> >
> >> > It appears that you are trying to build in the source directories,
> >> which is
> >> > not permitted. If you add the following line to your script:
> >> >
> >> > -D CMAKE_INSTALL_PREFIX:PATH=$TRILINOS_HOME/ALTIX4700_BUILD \
> >> >
> >> > or something similar, you should get past this issue.
> >> >
> >> > I hope this helps.
> >> >
> >> > Mike
> >> >
> >> > On 2/25/11 7:37 AM, "Raeth, Peter" <PRaeth at hpti.com
> >> <UrlBlockedError.aspx> >
> >> > wrote:
> >> >
> >> > In an effort to help users transition from shared to distributed-
> >> memory
> >> > machines, I am trying to install Trilinos on
> >> > http://www.afrl.hpc.mil/hardware/hawk.php. This is my first
> >> experience with
> >> > Trilinos.
> >> >
> >> > Reading the installation guide at
> >> > http://trilinos.sandia.gov/Trilinos10CMakeQuickstart.txt, I wrote
> the
> >> > following script:
> >> >
> >> > hawk-0:/app2/comenv/ALTIX4700/.unsupported/trilinos-10.6.2-Source/
> >> cat
> >> > ./do_configure.sh
> >> >
> >> > #!/bin/csh -x
> >> >
> >> > setenv TRILINOS_HOME
> >> > /app2/comenv/ALTIX4700/.unsupported/trilinos-10.6.2-Source
> >> > setenv PATH /app2/comenv/ALTIX4700/pkgs/cmake-2.8.1/bin:$PATH
> >> > cd $TRILINOS_HOME/build
> >> >
> >> > cmake \
> >> > -D CMAKE_BUILD_TYPE:STRING=DEBUG \
> >> > -D Trilinos_ENABLE_ALL_OPTIONAL_PACKAGES:BOOL=ON \
> >> > -D Trilinos_ENABLE_ALL_FORWARD_DEP_PACKAGES:BOOL=ON \
> >> > -D CMAKE_BUILD_TYPE:STRING=DEBUG \
> >> > -D Trilinos_ENABLE_TESTS:BOOL=ON \
> >> > -D Trilinos_ENABLE_Epetra:BOOL=ON \
> >> > -D Trilinos_ENABLE_Triutils:BOOL=ON \
> >> > -D Trilinos_ENABLE_Anasazi:BOOL=ON \
> >> > -D Trilinos_ENABLE_Didasko:BOOL=ON \
> >> > $TRILINOS_HOME
> >> >
> >> > exit
> >> >
> >> > hawk-0:/app2/comenv/ALTIX4700/.unsupported/trilinos-10.6.2-Source/
> >> >
> >> >
> >> >
> >> >
> >> > When I run this script I get the following error:
> >> >
> >> > hawk-0:/app2/comenv/ALTIX4700/.unsupported/trilinos-10.6.2-Source/
> >> > ./do_configure.sh
> >> >
> >> > setenv TRILINOS_HOME
> >> > /app2/comenv/ALTIX4700/.unsupported/trilinos-10.6.2-Source
> >> > setenv PATH
> >> > /app2/comenv/ALTIX4700/pkgs/cmake-
> >> 2.8.1/bin:/usr/local/krb5/bin:/usr/local/oss
> >> >
> >>
> h/bin:/opt/pbs/default/bin:/opt/intel/idb/9.1.042/bin:/opt/intel/cc/9.1
> >> .042/bi
> >> >
> >>
> n:/opt/intel/fc/9.1.036/bin:/hafs2/praeth/bin:/hafs2/praeth/bin/linux.a
> >> ltix:/u
> >> >
> >>
> sr/ucb:/bin:/usr/bin:/hafs_linux.altix:/app/csiapps/base/linux.altix/bi
> >> n:/app/
> >> >
> >>
> bciapps/base/linux.altix/bin:/usr/local:/usr/bin/X11:/usr/local/bin:/op
> >> t/gnome
> >> > /bin:.
> >> > cd /app2/comenv/ALTIX4700/.unsupported/trilinos-10.6.2-
> Source/build
> >> > cmake -D CMAKE_BUILD_TYPE:STRING=DEBUG -D
> >> > Trilinos_ENABLE_ALL_OPTIONAL_PACKAGES:BOOL=ON -D
> >> > Trilinos_ENABLE_ALL_FORWARD_DEP_PACKAGES:BOOL=ON -D
> >> > CMAKE_BUILD_TYPE:STRING=DEBUG -D Trilinos_ENABLE_TESTS:BOOL=ON -D
> >> > Trilinos_ENABLE_Epetra:BOOL=ON -D Trilinos_ENABLE_Triutils:BOOL=ON
> -D
> >> > Trilinos_ENABLE_Anasazi:BOOL=ON -D Trilinos_ENABLE_Didasko:BOOL=ON
> >> > /app2/comenv/ALTIX4700/.unsupported/trilinos-10.6.2-Source
> >> >
> >> > Configuring Trilinos build directory
> >> >
> >> > CMake Error at CMakeLists.txt:15 (MESSAGE):
> >> > Error,
> >> >
> >> >
> >>
> CMAKE_CURRENT_SOURCE_DIR=/app2/comenv/ALTIX4700/.unsupported/trilinos-
> >> 10.6.2-S
> >> > ource
> >> > ==
> >> >
> >> >
> >>
> CMAKE_CURRENT_BINARY_DIR=/app2/comenv/ALTIX4700/.unsupported/trilinos-
> >> 10.6.2-S
> >> > ource
> >> > Trilinos does not support in source builds!
> >> >
> >> >
> >> > -- Configuring incomplete, errors occurred!
> >> > exit
> >> >
> >> > hawk-0:/app2/comenv/ALTIX4700/.unsupported/trilinos-10.6.2-Source/
> >> >
> >> >
> >> >
> >> > Does anyone have advice? I appreciate any insights the community
> >> can offer.
> >> >
> >> >
> >> > Thanks,
> >> >
> >> > Peter.
> >> >
> >> > Peter G. Raeth, Ph.D.
> >> > Senior Staff Scientist
> >> > Signal and Image Processing
> >> > High Performance Technologies, Inc
> >> > 937-904-5147
> >> > praeth at hpti.com <UrlBlockedError.aspx>
> >> >
> >> >
> >> >
> >> > ________________________________
> >> > _______________________________________________
> >> > Trilinos-Users mailing list
> >> > Trilinos-Users at software.sandia.gov
> >> > http://software.sandia.gov/mailman/listinfo/trilinos-users
> >> >
> >> >
> >> > _______________________________________________
> >> > Trilinos-Users mailing list
> >> > Trilinos-Users at software.sandia.gov
> >> > http://software.sandia.gov/mailman/listinfo/trilinos-users
> >> >
> >> >
> >> >
> >> > _______________________________________________
> >> > Trilinos-Users mailing list
> >> > Trilinos-Users at software.sandia.gov
> >> > http://software.sandia.gov/mailman/listinfo/trilinos-users
> >>
> >>
> >> _______________________________________________
> >> Trilinos-Users mailing list
> >> Trilinos-Users at software.sandia.gov
> >> http://software.sandia.gov/mailman/listinfo/trilinos-users
> >>
> >>
> >>
> >> _______________________________________________
> >> Trilinos-Users mailing list
> >> Trilinos-Users at software.sandia.gov
> >> http://software.sandia.gov/mailman/listinfo/trilinos-users
> >>
> >>
> >> ________________________________
> >> _______________________________________________
> >> Trilinos-Users mailing list
> >> Trilinos-Users at software.sandia.gov
> >> http://software.sandia.gov/mailman/listinfo/trilinos-users
> >>
> >>
> >> _______________________________________________
> >> Trilinos-Users mailing list
> >> Trilinos-Users at software.sandia.gov
> >> http://software.sandia.gov/mailman/listinfo/trilinos-users
> >
> > _______________________________________________
> > Trilinos-Users mailing list
> > Trilinos-Users at software.sandia.gov
> > http://software.sandia.gov/mailman/listinfo/trilinos-users
> >
> >
>
>
>
>
>
> _______________________________________________
> Trilinos-Users mailing list
> Trilinos-Users at software.sandia.gov
> http://software.sandia.gov/mailman/listinfo/trilinos-users
More information about the Trilinos-Users
mailing list