[Trilinos-Users] troubles with --enable-mpi

Virginia Costa virscosta at gmail.com
Sat Jul 4 14:11:07 MDT 2009


Hi, people.
I wanna install trilinos 9.0.3 with the options --enable-mpi
--with-mpi-compilers and with all no default packages enable.
Something like this

sudo ./configure --enable-mpi --with-mpi-compilers --enable-default-packages
--enable-didasko- --enable-amesos --enable-anasazi --enable-belos
--enable-claps --enable-external --enable-fei --enable-intrepid
--enable-isorropia --enable-kokkos --enable-komplex --enable-loca
--enable-meros --enable-moertel --enable-phalanx --enable-phdmesh
--enable-pliris --enable-pytrilinos --enable-rbgen --enable-rythmos
--enable-sacado --enable-sundance --enable-teuchos --enable-pamgen
--enable-rtop  --enable-threadpool --enable-thyra --enable-stratimikos
--enable-moocho --enable-tpetra --enable-trilinoscouplings --enable-triutils
--enable-galeri --enable-webtrilinos --enable-zoltan --enable-shared
--enable-aztecoo-teuchos | tee configure_LINUX_MPI.log


However, it returned the following message:

checking for C compiler default output file name...
configure: error: C compiler cannot create executables
See `config.log' for more details.
configure: error: ./configure failed for packages/teuchos


Has anyone already seen this before?
The log file is attached.

Thanks.

Virginia.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://software.sandia.gov/pipermail/trilinos-users/attachments/20090704/0fb89866/attachment.html 
-------------- next part --------------
checking whether to enable maintainer-specific portions of Makefiles... no
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking how to create a ustar tar archive... gnutar
NOTE: If a package is not enabled based on the
configure options, but is required by another
package that has been enabled, it will
automatically be configured and built, even if
the list below does not indicate so.
checking whether to use default-packages... yes
checking whether to use amesos... yes
checking whether to use anasazi... yes
checking whether to use aztecoo... yes
checking whether to use belos... yes
checking whether to use claps... yes
checking whether to use didasko... no
checking whether to use epetra... yes
checking whether to use epetraext... yes
checking whether to use external... yes
checking whether to use ifpack... yes
checking whether to use fei... yes
checking whether to use intrepid... yes
checking whether to use isorropia... yes
checking whether to use kokkos... yes
checking whether to use komplex... yes
checking whether to use loca... yes
checking whether to use meros... yes
checking whether to use moertel... yes
checking whether to use ml... yes
checking whether to use new_package... yes
checking whether to use nox... yes
checking whether to use phalanx... yes
checking whether to use phdmesh... yes
checking whether to use pliris... yes
checking whether to use pytrilinos... yes
checking whether to use rbgen... yes
checking whether to use rythmos... yes
checking whether to use sacado... yes
checking whether to use sundance... yes
checking whether to use teuchos... yes
checking whether to use pamgen... yes
checking whether to use rtop... yes
checking whether to use threadpool... yes
checking whether to use thyra... yes
checking whether to use stratimikos... yes
checking whether to use moocho... yes
checking whether to use tpetra... yes
checking whether to use trilinoscouplings... yes
checking whether to use triutils... yes
checking whether to use galeri... yes
checking whether to use webtrilinos... yes
checking whether to use zoltan... yes
checking whether to use shared... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating Makefile.export.trilinos
config.status: creating packages/Makefile
config.status: creating Trilinos_config.h
config.status: Trilinos_config.h is unchanged
=== configuring in packages/teuchos (/opt/trilinos-9.0.3/packages/teuchos)
configure: running /bin/bash ./configure '--prefix=/usr/local'  '--enable-mpi' '--with-mpi-compilers' '--enable-default-packages' '--enable-didasko-' '--enable-amesos' '--enable-anasazi' '--enable-belos' '--enable-claps' '--enable-external' '--enable-fei' '--enable-intrepid' '--enable-isorropia' '--enable-kokkos' '--enable-komplex' '--enable-loca' '--enable-meros' '--enable-moertel' '--enable-phalanx' '--enable-phdmesh' '--enable-pliris' '--enable-pytrilinos' '--enable-rbgen' '--enable-rythmos' '--enable-sacado' '--enable-sundance' '--enable-teuchos' '--enable-pamgen' '--enable-rtop' '--enable-threadpool' '--enable-thyra' '--enable-stratimikos' '--enable-moocho' '--enable-tpetra' '--enable-trilinoscouplings' '--enable-triutils' '--enable-galeri' '--enable-webtrilinos' '--enable-zoltan' '--enable-shared' '--enable-aztecoo-teuchos' '--with-trilinos' '--enable-epetra' '--enable-ifpack' '--enable-aztecoo' '--enable-epetraext' '--enable-ml' '--enable-nox' '--enable-new_package' --cache-file=/dev/null --srcdir=.
----------------------------------------
Running Teuchos Configure Script
----------------------------------------
checking whether to enable maintainer-specific portions of Makefiles... no
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking target system type... x86_64-unknown-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking how to create a ustar tar archive... gnutar
checking whether to use fortran... yes
checking for mpicxx... mpicxx
checking whether we are using MPI... yes
checking for mpicxx... yes
checking for mpicc... yes
checking for mpif77... yes
checking for C compiler default output file name... 


More information about the Trilinos-Users mailing list